air compressor system, uk from ABAC Air Compressors UK

Booster

Technical Specifications // View Literature

air compressor system, uk The ALUP Booster uses pre-compressed air from an available compressed air network or is supplied directly by a dedicated compressor set to its standard pressure of 10 Bar.

The pre-compressed air (intake pressure up to 10 bar) is compressed to the desired higher final pressure - simply, safely, economically.

There is no need therefore to invest in a dedicated high-pressure network or to have a separate, decentralised compressor system.

The slow-running, air-cooled compressors can be adapted to almost all operating conditions due to their well-designed modular principle. This also applies to the robust Booster (located after the compressor) for operating pressures of up to 40 bar.

Technical Specifications

Model	Max Final Press	Max Final Press	FAD acc. to ISO 1217 at final pressure
	\|bar\|	\|bar\|	\|15bar\|	\|20bar\|	\|25bar\|	\|30bar\|	\|35bar\|	\|40bar\|

2-42-55	5.00	35	440	420	410	400	390	-

2-42-70	5.00	20	560	540	-	-	-	-

2-42-74	5.00	40	590	565	550	530	520	480
	7.50		920	890	860	840	815	785
	10.00		1.205	1.180	1.150	1.135	1.085	1.070

3-42-74	5.00	40	1.300	1.230	1.190	1.140	1.110	1.060
	7.50		1.980	1.910	1.840	1.800	1.755	1.700
	10.00		2.590	2.530	2.480	2.440	2.330	2.300

Model	Motor Power at Final Pressure						Dims	Air Connn
	\|15bar\|	\|20bar\|	\|25bar\|	\|30bar\|	\|35bar\|	\|40bar\|	\|lxwxh\|	G"

2-42-55	2.2	2.2	3.0	3.0	3.0	-	760 x 425 x 570	1/2"

2-42-70	2.2	3.0	-	-	-	-	760 x 425 x 570	1/2"

2-42-74	3.0	4.0	4.0	4.0	4.0	5.5	1.140 x 540 x 715	1/2"
	3.0	4.0	4.0	5.5	5.5	5.5
	3.0	4.0	4.0	5.5	7.5	7.5

3-42-74	5.5	7.5	7.5	11	11	11	1.350 x 575 x 755
	5.5	7.	11	11	11	11		3/4"
	5.5	7.5	11	11	15	15

Back to // Screw Compressors