Start-up
and use:
-
Connect the hose to the compressed air outlet. If the coupling is supplied
loose it must be securely screwed into the thread before use.
-
With the compressor OFF, connect the air-operated tool you intend to use
to the other end of the hose.
-
Insert the plug into an outlet of suitable size and rating. The
electricity supply must be earthed
-
Press or rotate the button of
the on/off switch.
-
Use regulator to adjust air flow appropriate to the air operated tools
specific requirement (see enc).
-
When not in use, always switch off the compressor using the on-off switch
(A).
-
If you intend to re-use the compressor, always wait for at least ten
seconds before switching this on again.
-
Always pull out the plug when you have finished work.
-
The winding of the electrical motor incorporates a thermal cut-out RT that
automatically switches off the electric current if the motor overheats.
The motor restarts automatically when it has cooled to normal temperature.
|
