-
Always wear goggles to protect your eyes against
flying objects that may be
lifted by the jet of air.
-
Avoid the use of extension leads, keep the
compressor and accessories away from children, and never direct the jet of
air towards persons or animals or your own body.
-
Stop the compressor before disconnecting any accessories.
-
This compressor is designed for intermittent operation.
-
While compressed air is produced a certain amount of heat is generated,
specially if the machine has been running for a long time, allow for
the machine to cool down before unplugging the hose from the compressor.
- Certain basic rules must be observed when using an electro-mechanical
appliance.
- The compressor is not designed for industrial applications or continuous
use.
- Make sure that the mains supply to which the appliance is connected
complies with
current safety regulations and is correctly earthed.
- Never use the appliance with bare feet or wet hands or feet.
- Use of adaptors, multiple sockets and extensions, even if of suitable
capacity (cable
cross section area (2.5 mm 2 ) should be avoided especially in damp places.
- The appliance must never be exposed to adverse weather conditions (rain,
sun, fog
or
snow).
- Keep children and animals at a safe distance from the work area.
- Always leave sufficient space (at least 5 meters) between the compressor
and the
work area in particular when using tools for spraying of liquids.
- Never clean the machine with liquids or solvents. When cleaning,
disconnect the
machine from the electricity supply by removing the plug and use a damp
cloth only.
- The compressor must be placed on a stable surface.
- The compressor is designed for air compression only and must never be
used
for any
other
type of gas.
- Never direct the jet of air towards persons or animals or your body.
-
Never direct the jet of water or other materials sprayed by tools
connected to the
compressor towards the compressor.
-
The compressor must not be used for pharmaceutical, food or sanitary
purposes. It is
not
suitable for filling the air bottles of scuba divers.
-
When using compressed air, you must know and comply with the safety
precautions to
be adopted for the single applications (inflating, pneumatic tools,
painting, washing
with
water based detergents only, etc.).
If you have any safety concerns or question,
please contact the ABAC Technical Support team
sales@abac.co.uk
or call us on 01895 258580 |
