Precautions
  • Always wear goggles to protect your eyes against flying objects that may be lifted by the jet of air.
  • Carry the compressor by its handle, avoid the use of extension leads, keep the compressor and accessories away from children, and never direct the jet of air towards persons or animals or your own body.
  • Stop the compressor before disconnecting any accessories.
  • This compressor is designed for intermittent operation, it should not be run continuously for more than 15 - 20 mins.
  • While compressed air is produced a certain amount of heat is generated, specially if the machine has been  running for a long time, allow for the machine to cool down before unplugging the hose from the compressor.



Key

A - On/Off switch
B - Pressure regulator
C - Compressed air outlet
D - Power cable
D1 - Plug
E - Carrying handle
F - Spiral air tube
G - Rating data

 

 


THE COMPRESSOR MUST BE USED IN A SUITABLE ENVIRONMENT (WELL VENTILATED WITH AN AMBIENT TEMPERATURE OF BETWEEN +5°C AND +40°C) AND NEVER IN PLACES AFFECTED BY DUST, ACIDS, VAPORS, EXPLOSIVE OR FLAMMABLE GASES, RAIN OR SNOW.

  • Certain basic rules must be observed when using an electro-mechanical appliance.

  • This compressor is designed for intermittent operation of 25% (2.5 minutes ON, 7.5 minutes OFF).

  • The compressor is not designed for industrial applications or continuous use.

  • Make sure that the mains supply to which the appliance is connected complies with current safety regulations and is correctly earthed.

  • Never use the appliance with bare feet or wet hands or feet.

  • Always use the carrying handle (E) to transport the compressor.

  • Use of adaptors, multiple sockets and extensions, even if of suitable capacity (cable cross section area (2.5 mm2) should be avoided especially in damp places.

  • The appliance must never be exposed to adverse weather conditions (rain, sun, fog or snow).

  • Keep children and animals at a safe distance from the work area.

  • Always leave sufficient space (at least 5 meters) between the compressor and the work area in particular when using tools for spraying of liquids.

  • Never clean the machine with liquids or solvents. When cleaning, disconnect the machine from the electricity supply by removing the plug and use a damp cloth only.

  • The compressor must be placed on a stable surface.

  • The compressor is designed for air compression only and must never be used
    for any other type of gas.

  • Never direct the jet of air towards persons or animals or your body.

  • Never direct the jet of water or other materials sprayed by tools connected to the compressor towards the compressor.

  • The compressor must not be used for pharmaceutical, food or sanitary purposes. It is not suitable for filling the air bottles of scuba divers.

  • When using compressed air, you must know and comply with the safety precautions to be adopted for the single applications (inflating, pneumatic tools, painting, washing with water based detergents only, etc.).