Connect the spiral air tube (F) to the compressed air outlet (C). The coupling C is supplied loose and must be securely screwed into the thread before use.

With the compressor OFF, connect the air-operated tool you intend to use to the other end of the hose.

Insert the plug into an outlet of suitable size and rating. The electricity supply must be earthed.

Press the button of the on/off switch.

Use regulator (B) to adjust air flow appropriate to the air operated tools specific requirement (see enc).

When not in use, always switch off the compressor using the on-off switch (A).

If you intend to re-use the compressor, always wait for at least ten seconds before switching this on again.

Always pull out the plug (D1) when you have finished work.

The winding of the electrical motor incorporates a thermal cut-out RT that automatically switches off the electric current if the motor overheats. The motor restarts automatically when it has cooled to normal temperature.