SPINN- Rotary Screw Compressor - 5.5 kW, 7.5 kW, 11 kW
Product Highlights // Technical
Specifications //
Literature Download
 Simple, Silent, Economic
Range: 5.5 - 11 kW
- Unique Technology - Fitted with the latest generation TriAB Rotary Screw Compressor Air End
- Efficient - High output with very low power consumption
- Simple, Advanced Design - Lower maintenance costs
- Acoustically Engineered - Ultra Quiet
- Extremely compact - Simple to install
- Engineered to last - Rugged and reliable
Product Highlights
- Innovation:
Highly developed and compact compressed air station incorporating new principles of design allowing for significant improvement in performance against other machines
- Design:
Although an industrial machine the SPINN features, simple aesthetic design, attractive in any working environment
- Low Noise:
Offers extremely low noise operating levels to allow the positioning of the compressor in the work place even in the immediate vicinity of personnel
- Maneuverability:
Easily maneuvered thanks to the specially designed cabinet which allows for the use of a standard pallet or fork-lift truck from the side/front/rear
- Low
Maintenance: Fitted with a unique TriAB compressor air end this along with the careful placement of service items allows ease of maintenance and a reduction in costs
- Reliability:
High quality industrial compressor suitable for all applications from a small workshop to the most sophisticated industrial process
TriAB Air ends
 The ABAC screw compressors are fitted with the unique TriAB air ends that are designed and built exclusively at the ABAC factories, which are certified to ISO 9001. The highest quality standards are strictly adhered to throughout the manufacturing process ensuring constantly high quality.
- Highly developed, asymmetric rotor profiles with precision ground 5/6 lobe configuration, provides higher compressed air output with lower power consumption
- Each rotor is fitted with 3 oversized high precision bearings allowing a longer air end life
- Shaft seal with a 3 lip design providing a total protection from oil and other contaminants
- Toothed safety washers and special locking nut ensure that the rotor tolerances are set throughout the life of the unit for improved reliability
Accessibilty
In the design of the SPINN series a good deal of consideration was given to providing accessibility and ease of maintenance, all standard service components have been positioned at the front of the compressor thus allowing immediate accessibility by simply removing the front panel.
Low maintenance times and costs
The quick and easy access to the routine maintenance components allows minimum compressor downtime and also a drastic reduction in service time and thus lower costs.
Oil
Filtration
Providing high quality compressed air in Line with key environmental objectives has been given a lot of attention during the development of the SPINN range. Thanks to the unique internal design of The vertical air/oil separator vessel and the high efficiency air/oil separator cartridge, very clean compressed air is provided.
Residual oil content within the delivered compressed air is less than 3 mg. per cubic metre.
Air Cooling
The air flow generated by the electric fan provides very efficient cooling even during continuous use and in high ambient temperatures. This combined with the high efficiency oil cooler allows operating temperatures to be very low. The lower operating temperatures result in longer life to both components and to the lubricant.
 Controls
The new SPINN series a comprehensive, yet easy to use controller, with all adjustments easily made via the simple controls. The standard safety features protect against high temperature, low oil, motor overload, and incorrect rotation.
Silence
All drive components such as the main motor and the air end etc. are mounted on a sturdy baseplate which is supported by anti vibration-dampers absorbing vibration and any resulting noise. The sound absorbent cabinet panels finally ensure the lowest possible noise levels.
Automatic belt adjustment
The entire SPINN range features an automatic belts tensioning system ensuring longer life to the drive belts, preventing slipping and allowing for simple quick replacement.
Technical Specifications
| SPINN - Technical Characteristics
- Basic versions |
|
Model
|
Pressure
|
Capacity
ISO 1217
|
Motor
Power
|
Air End |
Noise
Level
|
Dims
(mm)
|
Wgt
|
|
 |
|Bar |
|cfm |
cu. m/min| |
|kW |
HP| |
|type| |
|db| |
|LxWxH| |
|Kg| |
|
|
|
|
|
|
|
|
|
|
SPINN 5.5 |
8
10 |
27.6
24.7 |
0.78
0.70 |
5.5 |
7.5 |
TriAB 51 |
64 |
930 X 615
X 1045 |
265 |
|
SPINN 7.5 |
8
10 |
42.4
36.7 |
1.20
1.04 |
7.5 |
10 |
TriAB 51 |
66 |
930 X 615
X 1045 |
270 |
|
SPINN 11 |
8
10
|
58.3
49.5
|
1.65
1.40
|
11 |
15 |
TriAB 51 |
69 |
930 X 615
X 1045 |
280 |
|
|
|
SPINN - Technical Characteristics - on 270 lt receiver |
|
Model |
Pressure |
Capacity
ISO 1217 |
Motor
Power |
Air End |
Noise
Level |
Dims
(mm) |
Wgt |
|
|
|Bar |
|cfm |
cu. m/min| |
|kW |
HP| |
|type| |
|db| |
|LxWxH| |
|Kg| |
|
|
|
|
|
|
|
|
|
|
SPINN 5.5/270 |
8
10 |
27.6
24.7 |
0.78
0.70 |
5.5 |
7.5 |
TriAB 51 |
64 |
1180 X 615
X 1640 |
335 |
|
SPINN 7.5/270 |
8
10 |
42.4
36.7 |
1.20
1.04 |
7.5 |
10 |
TriAB 51 |
66 |
1180 X 615
X 1640 |
340 |
|
SPINN 11/270 |
8
10
|
58.3
49.5
|
1.65
1.40
|
11 |
15 |
TriAB 51 |
69 |
1180 X 615
X 1640 |
350 |
*
Capacity referred at 8 bar |
|
|
