Oil - Water Separaters - HS Series
Air Treatment //
Technical
Specifications // 
View Literature
- An investment for the future
- Suitable for Mineral and Synthetic Lubricants
- MAX. compressor capacity 70 m3/min
- Compact Design
Controlling pollutants is an important aspect to the operation of any industrial
process
The Problem:
The condensate produced as a by-product of compressed air generation is a toxic and hazardous substance that provides a danger to the environment. As well as environmental concerns, stricter regulation governing the control of this substance combine to provide a real challenge to all users of compressed air, in order to avoid fines and to prevent the release of dangerous material into the environment.
The Solution:
The new PURO range of condensate management systems provides a new solution to a growing problem. By employing new filtration procedures the
PURO series provides maximum security along with ease of use and simple low cost maintenance.
What makes PURO better:
Conventional condensate separators rely on the physical separation/gravitation of the oil from the water so that the oil can be drained separately and the remaining water cleaned through an activated carbon media. This process is adversely affected in cases where vibration or shocks are present and by any turbulence created by an increase in compressed air flow. Furthermore the oil needs to be drained from the system into a container before disposal. Finally over time the water that sits in the primary stage tank becomes stagnant and therefore may present health risks.
The PURO provides the following advantages over conventional
systems:
- Utilises a primary stage filter bag that absorbs oil but not water that does not rely on gravitational
separation
- The PURO unique full length oleophilic oil filter system ensures that only clean filter is aligned to the water
surface
- The waste oil collected is safely contained within the filter allowing clean and convenient
disposal
- Due to the efficiency of the stage on filtration, the service life and efficiency of the carbon bag in the second stage is significantly
increased
- The simple design and simple set up allow convenient
installation.
- The PURO system can handle synthetic coolants with no reduction in capacity allowing a simple choice to be made
Technical Specifications
| Model |
Maximum Capacity |
Test Valve |
Activated Carbon Elements |
Inlet Connections |
Outlet connections |
Residual Oil Content |
Dimensions |
|
|
cfm |
m3
/ min |
|
|
inches |
inches |
ppm |
mm |
| |
|
|
|
|
|
|
|
|
| Enviro |
65 |
1.80 |
Yes |
1 off |
1/2", 3/8", 1/4" |
1/2" |
< 10
ppm |
261 x 600 x 270 |
|
| Puro |
300 |
8.00 |
Yes |
1 off |
1/2" (2) |
1/2" |
< 10 ppm |
700 x 665 x 310 |
|
| Puro
Midi |
700 |
20.00 |
Yes |
1 off |
1/2" (2 off) |
1/2" |
< 10 ppm |
800 x 1000 |
|
| Puro
Grand |
1,250 |
35.00 |
Yes |
1 off |
1/2" (4 off) |
1/2" |
< 10 ppm |
1065 x 1105 |
|
Puro
Grand
xfender |
2,500 |
70.00 |
Yes |
2 off |
1/2" (4 off) |
1/2" |
< 10 ppm |
(Corner Set-up) 1065 x 1067.5 x 1105 (W all Set-up) 1105 x 1752 |
|
For dimensional drawings
please download the brochure: Click
Here Dealing with Hazardous Substances: Register with
Envirowise, and download document:
GG490, Practical ways to manage and minimise hazardous waste
Back to // Air
Treatment
|
